- New
Process Signal Generator (mA, V, TC, RTD, up to 0.02 %)
Handheld process signal generator: sources and measures mA, V, mV, resistance, frequency, thermocouple and RTD signals, with 24 V loop power and basic accuracy up to 0.02 %.
Certified equipment
ATEX / IECEx documentation supplied where stated
Worldwide delivery
Incoterms agreed in each quotation
Quotation first
Price, lead time and certificates in every offer
This series is a battery-powered handheld process signal generator and loop calibrator. It sources and measures the usual process signals, simulates sensors and transmitters, tests control loops and checks instrument accuracy in the field.
Output and measurement can run simultaneously, and the built-in 24 V DC loop supply powers two-wire transmitters without an external supply.
Key features
- Output and measurement of V, mV, mA, resistance, frequency, pulse, thermocouple and RTD signals
- Simultaneous source and measure for transmitter calibration
- 24 V DC loop power for two-wire transmitters
- Step, ramp, 25 % step and programmable curve (up to 100 points) outputs
- High-contrast 5-digit LCD, keypad and rotary encoder
- Rechargeable battery, rugged case
Technical data
| Model | AG-CAL-110-10 / AG-CAL-110-20B / AG-CAL-110-30 / AG-CAL-110-30P |
| DC voltage | 0 to 15 V; 0 to 24 mV; 1 to 100 mV |
| DC current | 0 to 24 mA (source); 0 to 20 mA (sink) |
| Resistance | 10 Ω to 300 kΩ |
| Frequency / pulse | Up to 1 MHz, adjustable duty cycle |
| Thermocouples | K, E, J, T, R, B, S, N |
| RTD | Pt100, Cu50 and other common types |
| Accuracy | 0.02 % to 0.05 % typical depending on signal |
| Loop power | 24 V DC |
| Display | LCD, 5 digits |
| Communication | RS485 (Modbus) optional |
| Power supply | Internal rechargeable battery or DC adapter |
| Operating temperature | -10 to +55 °C |
| Weight | Approx. 0.4 kg |
Applications
- Calibration of 4 to 20 mA pressure, temperature and level transmitters
- Testing PLC analogue input and output modules
- Simulating thermocouples and RTDs for temperature controllers
- Checking valve positioners and I/P converters
- Control loop troubleshooting in plants
- Workshop and laboratory instrument verification
Hazardous areas
Standard version for safe areas. Ask us for hazardous-area options.
Supplied on quotation and configured to your requirements (model, signal types, thermocouple types, accessories). Datasheet available on request.
Supplied from a qualified manufacturer selected by ASSINOV. Origin, manufacturer details and certificates are provided with our quotation.
AG-CAL-110
Data sheet
- Power supply
- Rechargeable battery / 24 V loop
- Hazardous area
- Safe area (options on request)
- Accuracy
- 0.02 % to 0.05 %
- Output
- mA / V / mV / ohm / Hz / TC / RTD
2 other products in the same category:
Handheld process signal generator: sources and measures mA, V, mV, resistance, frequency, thermocouple and RTD signals, with 24 V loop power and basic accuracy up to 0.02 %.