- New
Submersible Level Transmitter (sewage, anti-clog cage, IP68)
Fully submersible 316L level transmitter with anti-clog double flange cage for sewage and wastewater. Ranges up to 100 mH2O, ±0.5 % FS (±0.25 % option), 4 to 20 mA, voltage or RS485 Modbus RTU, IP68.
Certified equipment
ATEX / IECEx documentation supplied where stated
Worldwide delivery
Incoterms agreed in each quotation
Quotation first
Price, lead time and certificates in every offer
The AG-LVL-106 is a fully submersible hydrostatic level transmitter for sewage, wastewater and viscous media. A piezoresistive sensing element is housed in a hermetically sealed 316L stainless steel body.
Its open double flange "steel cage" front end lets liquid flow to the diaphragm while protecting it from debris, mud, sand, rags and turbulence, and its added weight keeps the transmitter at the bottom of the tank or well. A vent tube in the cable compensates for atmospheric pressure changes.
Key features
- All 316L stainless steel construction, hermetically sealed
- Anti-clog double flange cage protects the diaphragm
- Vented cable with filter for atmospheric compensation
- Reverse polarity and short-circuit protected electronics
- Cable withstands more than 200 lb of strain
- Optional lightning and surge protection
Technical data
| Model | AG-LVL-106 |
| Measuring range | 0 to 1 mH2O up to 0 to 100 mH2O (0 to 10 bar); other ranges on request |
| Pressure type | Gauge or absolute |
| Accuracy | ≤ ±0.5 % FS typical; ≤ ±0.25 % FS optional (at 25 °C) |
| Overload / burst pressure | 200 % FS / 300 % FS |
| Output | 4 to 20 mA (2-wire); 0 to 5 V / 0 to 10 V / 0.5 to 4.5 V (3-wire); RS485 Modbus RTU |
| Power supply | 3.5 to 36 V DC or 5 V DC depending on output |
| Working temperature | -40 to +80 °C (non-corrosive medium) |
| Compensated temperature | 0 to 50 °C |
| Response time | ≤ 10 ms |
| Wetted materials | Case 316L; sensor 316 stainless steel |
| Cable | PE standard; FEP or PUR optional; vented, length to order |
| Process connection | Double 90 mm (3.5") flange cage; body diameter 28 mm |
| Protection | IP68 |
Applications
- Sewage and lift stations
- Storm canals, weirs and wells
- Reservoirs, ponds and dams
- Sludge and slurry tanks
- Wastewater treatment and biogas plants
- Irrigation and agricultural level control
Hazardous areas
An intrinsically safe version (Ex ia IIC T6) is declared by the manufacturer, together with CE and RoHS conformity. Certificates (ATEX / IECEx where applicable) are provided on request with the quotation.
Supplied on quotation and configured to your process data (range, process connection, materials, output, options). Datasheet available on request.
Supplied from a qualified manufacturer selected by ASSINOV. Origin, manufacturer details and certificates are provided with our quotation.
AG-LVL-106
Data sheet
- Hazardous area
- Ex ia IIC T6 declared
- Accuracy
- ±0.5 % FS (±0.25 % option)
- Output
- 4-20 mA / 0-10 V / RS485 Modbus
- Protection
- IP68
- Measuring principle
- Hydrostatic / piezoresistive
- Wetted material
- 316L stainless steel
6 other products in the same category:
Fully submersible 316L level transmitter with anti-clog double flange cage for sewage and wastewater. Ranges up to 100 mH2O, ±0.5 % FS (±0.25 % option), 4 to 20 mA, voltage or RS485 Modbus RTU, IP68.